BBSHY - ROTATING DISK, #5007488-1
- MSDS: BBSHY
- Manufacturer: GOODYEAR AEROSPACE CORP
- Product Name: ROTATING DISK, #5007488-1
- National Stock Number: 1630-00F005361
Product Identification
Product ID:ROTATING DISK, #5007488-1
MSDS Date:01/01/1987
FSC:1630
NIIN:00F005361
MSDS Number: BBSHY
Responsible Party
Emergency Phone: (216) 796-2121
Cage: EO533
Contractor
Telephone: 216-796-2800
Cage: 25500
Ingredients
GRAPHITE, SYNTHETIC
CAS: 7440-44-0
RTECS: FF5250100
Fraction By Weight: 45%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 2 MG/M3 TDUST; 9293
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 40%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3; 9192
PHENOL-FORMALDEHYDE RESIN
Fraction By Weight: 1-5%
Hazards
Effects of Overexposure:EXPOSURES TO AIRBORNE CONCENTRATIONS MAY CAUSE
EYE, UPPER RESPIRATORY SYSTEM OR SKIN IRRITATION.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. EYE CONTACT: FLUSH WITH
WATER. IF IRRITATION PERSISTS, SEE A PHYSICIAN. SKIN CONTACT: WASH
WITH SOAP AND WATER.
Fire Fighting
Unusual Fire/Explosion Hazard:INCINERATION CAN GENERATE AIRBORNE FIBERS
WHICH MAY CAUSE ELECTRICAL MALFUNCTIONS.
Accidental Release
Spill Release Procedures:IF DUST HAS BEEN SPILLED, ISOLATE AND WET
USING FINE MIST IF POSSIBLE. SWEEP MATERIAINTO AN AIR-TIGHT BAG OR
CONTAINER. WASH CONTAMINATED CLOTHING SEPARATEL
Handling
Handling and Storage Precautions:HANDLE TO MINIMIZE FORMATION OF DUST.
ELECTRICAL EQUIP IN AREA WHERE DUST MAY BE GENERATED SHOD BE SEALED
TO PREVENT INVASION BY CARBON FIBERS.
Other Precautions:CHEMICALS SHOULD BE HANDLED TO PREVENT EYE CONTACT &
EXCESSIVE SKIN CONTACT. APPROPRIATE EYE & SKIN PROTECTION SHOULD BE
EMPYED. INHALATION OF DUSTS & VAPORS SHOULD BE AVOIDED.
Exposure Controls
Respiratory Protection:WEAR A NIOSH/MSHA-APPROVED RESPIRATOR FOR DUST.
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV.
Eye Protection:GOGGLES
Other Protective Equipment:IF ABRASION-CREATED DUST LEVELS ARE HIGH
WEAR GOGGLES.
Supplemental Safety and Health
MSDS DATE: 4/2/85
Chemical Properties
Boiling Pt:B.P. Text:NONE
Appearance and Odor:BLACK SOLID
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:DISPOSE OF SUBASSEMBLY IN AN APPROVED INDUSTRIAL
LANDFILL.
_
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.